Stud and Track

Vision Built offers a cold rolled “C” section stud and track that are rolled from our rolled forming machines with precise accuracy, thus eliminating any wastage on site.

These components are manufactured from pre-galvanised structural grade steel in compliance to BS EN10326:2004 and are cut to size and marked individually. Each part is dimpled and notched with the holes ready to accept fasteners so that components clip together with no clamping or drilling required. You can simply snap the parts together, add the fasteners and have a completed frame. Deflection head brackets can also be included if required.

For more information, please contact our design department.

  • Width 89mm and 150mm
  • Thickness 1.0mm 1.2mm 1.5mm 1.6mm and 1.8mm

Stud and Track

Vision Built offer a wide range of pre-assembled load bearing panels for structures up to 10 storeys. Because the panels are manufactured offsite in our factory, this reduces the amount of time and labour on site. Our external panels are delivered to site with factory applied insulation (PIR/Mineral Wool) or cement board, ready for any site applied cladding systems.

With the use of our 3D modelling software we can provide a fully integrated structure that incorporates hot rolled steel, service openings for M&E, concrete stairs or any further ancillary items.

Vision Built have an array of Fire and acoustic tests to hand, to suit the need of any building requirement.

Our pre-insulated panels eliminate cold bridging and with Vision Built accredited junction details can bring ψ Value to
as low as 0.04.

  • Width 89mm and 150mm
  • Thickness 1.0mm 1.2mm 1.5mm 1.6mm and 1.8mm

Load Bearing Structural Wall Panels

Vision Built offer a wide range of pre-assembled load bearing panels for structures up to 10 storeys. Because the panels are manufactured offsite in our factory, this reduces the amount of time and labour on site. Our external panels are delivered to site with factory applied insulation (PIR/Mineral Wool) or cement board, ready for any site applied cladding systems.

With the use of our 3D modelling software we can provide a fully integrated structure that incorporates hot rolled steel, service openings for M&E, concrete stairs or any further ancillary items.

Vision Built have an array of Fire and acoustic tests to hand, to suit the need of any building requirement.

Our pre-insulated panels eliminate cold bridging and with Vision Built accredited junction details can bring ψ Value to
as low as 0.04.

Structural Wall Panels

Vision Built offer a wide range of pre-assembled load bearing panels for structures up to 10 storeys. Because the panels are manufactured offsite in our factory, this reduces the amount of time and labour on site. Our external panels are delivered to site with factory applied insulation (PIR/Mineral Wool) or cement board, ready for any site applied cladding systems.

With the use of our 3D modelling software we can provide a fully integrated structure that incorporates hot rolled steel, service openings for M&E, concrete stairs or any further ancillary items.

Vision Built have an array of Fire and acoustic tests to hand, to suit the need of any building requirement.

Our pre-insulated panels eliminate cold bridging and with Vision Built accredited junction details can bring ψ Value to
as low as 0.04.

Volumetric Modular

Focused on the education and healthcare sectors, Vision Built offers full 3D volumetric solutions using hot rolled and light gauge steel structures manufactured by Vision Built and assembled in our state-of-the-art 100,000 sq. foot factory.

We have successfully delivered several modular projects on schedule and to spec.

VOLUMETRIC MODULAR

Focused on the education and healthcare sectors, Vision Built offers full 3D volumetric solutions using hot rolled and light gauge steel structures manufactured by Vision Built and assembled in our state-of-the-art 100,000 sq. foot factory.

We have successfully delivered several modular projects on schedule and to spec.

SFS

Vision Built offers a full design and supply of an infill solution that sits in the inside line of the building, between the structural slabs or alternatively an outfill solution can also be provided where the panels run continuously on the outside of the structure. The studs are provided with swaged ends which allow for a flush system, ready for the application of most cladding systems.

The SFS system is predominately used to infill or outfill reinforced concrete or hot rolled steel structures.

Vision Built provide bay drawings to the client that incorporate all openings in the building facade. Deflection heads are also incorporate to the top of panels to allow for any deflection in the main structure.

The studs are supplied to site in bundles and are individually clearly marked, providing an effortless installation on site.

SFS

Vision Built offers a full design and supply of an infill solution that sits in the inside line of the building, between the structural slabs or alternatively an outfill solution can also be provided where the panels run continuously on the outside of the structure. The studs are provided with swaged ends which allow for a flush system, ready for the application of most cladding systems.

The SFS system is predominately used to infill or outfill reinforced concrete or hot rolled steel structures.

Vision Built provide bay drawings to the client that incorporate all openings in the building facade. Deflection heads are also incorporate to the top of panels to allow for any deflection in the main structure.

The studs are supplied to site in bundles and are individually clearly marked, providing an effortless installation on site.

Access Technical Downloads

SIGN UP HERE

Lattice Joist

Vision Built manufacture a range of lattice joists that can be assembled to form a floor structure, roof structure the lattice truss is a cost-effective way of spanning larger areas and the truss depth can be varied to achieve different spans. Lattice joists can also be used to infill hot rolled steel floor structures giving a fast, accurate and structurally stable construction.

Lattice joists can be used to form flat roof construction and can also be designed with a slight fall in one direction.

For further information please contact our technical department.

Examples of the spans:

  • 200mm up to 4.0 meters
  • 250mm up to 4.5 meters
  • 300mm up to 6.0 meters

Lattice Joist

Vision Built manufacture a range of lattice joists that can be assembled to form a floor structure, roof structure the lattice truss is a cost-effective way of spanning larger areas and the truss depth can be varied to achieve different spans. Lattice joists can also be used to infill hot rolled steel floor structures giving a fast, accurate and structurally stable construction.

Lattice joists can be used to form flat roof construction and can also be designed with a slight fall in one direction.

For further information please contact our technical department.

Examples of the spans:

  • 200mm up to 4.0 meters
  • 250mm up to 4.5 meters
  • 300mm up to 6.0 meters

LGS Roof Trusses

Vision Built offer a full design and supply of light gauge steel roof trusses for a fast light efficient method of roof construction. Light gauge steel roof trusses provide a far lighter option than that of timber.

For further information please contact the Vision Built technical department.

LGS Roof Trusses

Vision Built offer a full design and supply of light gauge steel roof trusses for a fast light efficient method of roof construction. For further information please contact the Vision Built technical department.

View technical data!

Composite Deck Construction

Vision Built can supply a 160mm composite decking as an alternative floor options to lattice joists. The slab will be supplied and installed as part of our full structural package. This fully engineered solution provides adequate reinforcement and mesh to meet the building’s needs. Vision Built can also offer suitable edge trim if brick support is required.

Composite Deck Construction

Vision Built will supply and install as part of their full structural package suitable composite deck which are commonly used as part of a composite floor slab where the decking acts as both permanent formwork and tensile reinforcement (sagging) in the bottom of the slab. As part of the contract Vision built will price for the placing of the reinforcement and concrete please contact the estimat ing department

THE FUTURE OF CONSTRUCTION… IS NOW!